Wood processing plants generate different types of wood waste, including sawdust, wood shavings and small wood particles.
With suitable preparation, drying, adhesive mixing and hot pressing, these materials can be used to manufacture compressed wood blocks.
A complete wood block production line consists of five main sections:
Crushing → Drying → Glue Mixing → Hot Pressing → Cutting
Each section needs to match the raw material characteristics and required production capacity.
The crushing system is selected according to the type, original dimensions and quantity of raw materials.
The recommended final particle size is approximately 10 × 10 mm.
However, the material should not be reduced entirely to fine wood powder. A suitable mixture of sawdust and wood shavings is preferred.
When selecting a crusher, consider:
Different raw materials may require different crushing equipment. Providing photographs of the available materials is helpful when evaluating the machine configuration.
Moisture content is an important consideration before adhesive mixing.
The target moisture content of the dried sawdust or shavings is approximately 10%.
The dryer should be selected according to:
Initial moisture content: Wet raw materials require more drying capacity.
Required output: Production capacity determines the amount of material that needs to be processed per hour.
Material characteristics: Sawdust and shavings may behave differently during drying.
The actual dryer configuration should be confirmed according to the incoming moisture, target moisture and required throughput.
After drying, the wood material enters the glue mixing section.
The proposed arrangement includes:
The supplied process information gives a reference consumption of approximately 15–18 kg of liquid urea-formaldehyde resin per 100 kg of sawdust and shavings.
This is an indicative starting ratio, not a fixed recipe for every project.
Actual adhesive consumption depends on resin formulation and solids content, material moisture, particle characteristics, block density and bonding requirements. Production trials should be used to establish the final formulation.
The purpose of the mixer is to distribute the adhesive through the wood material before it enters the press.
Once the adhesive has been distributed, the mixed material is fed into the wood block presser.
The press compresses and bonds the material into the required block shape.
The machine configuration should be determined according to:
These factors need to be considered together when selecting a wood block press.
After pressing, the formed blocks need to be cut to the specified dimensions.
A cutting saw can be integrated into the production line.
An automatic cutting saw is also available as an optional configuration, depending on the customer's production requirements.
The cutting arrangement should be matched to the block dimensions and required output.
| Production stage | Main function | Key consideration |
| Crushing | Reduce raw material size | Around 10 × 10 mm |
| Drying | Reduce moisture | Around 10% |
| Glue mixing | Distribute adhesive | Manual batching, automatic mixing and discharge |
| Hot pressing | Form compressed blocks | Block dimensions and pressing conditions |
| Cutting | Produce required lengths | Manual or automatic cutting |
For customers evaluating the upstream material preparation and related manufacturing equipment, the following pages may also be useful:
Drum Chipper – Wood size reduction equipment
Wood Chips Screen – Wood material classification
Ring Glue Blender – Related industrial adhesive mixing equipment
Forming Machine – Material forming equipment
Continuous Press Machine – Industrial continuous pressing equipment
These are related equipment references. Their functions and configurations are different from the dedicated wood block production machines.
A production line should be designed around the raw materials available at your factory, rather than selecting individual machines without considering the complete process.
To evaluate your project, please provide:
| Project information | Details required |
| Raw materials | Sawdust, shavings or mixed materials |
| Raw material size | Current particle dimensions |
| Initial moisture | Approximate moisture content |
| Required output | Production capacity per hour |
| Target moisture | Around 10% |
| Block dimensions | Width, height and length |
| Adhesive | Liquid UF resin or other specified adhesive |
| Cutting requirement | Manual or automatic cutting |
| Factory conditions | Available space and power supply |
If possible, send us photographs of your raw materials. This helps us understand their size, shape and condition before recommending the crushing and drying systems.
A suitable wood block production line is the result of matching the raw material, moisture level, adhesive system, pressing equipment and cutting requirements.
Whether you have mainly sawdust, wood shavings or a mixture of both, the first step is to evaluate the material.
Contact us with your raw material photos, moisture content and expected production capacity. We can discuss the equipment configuration for your wood block production project.
can not be empty
can not be empty